• Peter Bateman
    71
    In the current edition of Safeguard magazine Dr Andy Snell outlines some of the symptoms workers can exhibit when they are exposed to solvents.

    What is the worst solvent exposure example you have encountered? What changes were made to fix the problem?

    You can respond in public here on the Forum, or privately here via a Survey Monkey form.

    An edited selection of responses will be published in the July/Aug edition, but with no names attached. One randomly selected person will receive a prize!
  • Derek Miller
    7
    Did one job where painters were as high as kites in the paint mixing area. This was because the vetilation system had been put in at floor level due to the mistaken belief that vapours, being heavier than air, went down so avoid the breathing zone. Monitoring and smoke tests showed that there was a large build up of solvent vapours in the air an dthat the air movemnet at head height was non-existant, except when someone moved. We called in a ventlation engeineer and together we modified and upgraded the system to such an extent that the follow up monitoring showed eveything was well under control and staff no longer had to wear respirators in the area. It was a team effort (as is often the case) to resolve this one involving the workers, mangement, ventolation engineer and myself.
  • Vickory Wilson
    5
    When my father was a young fibreglass worker (many many years ago) he said they were fibreglassing the inside of a tank, and would take bets on who would last longest before passing out!!!
  • Andrew
    106
    Back in a previous life I worked in a "cultured marble" factory. Both on the floor and as an installer - because I was the only one with a legal driving licence.

    We made spa baths. Relatively simple: mix 3 tubs of resin with catalyst, add color, pour into mould.
    All was good with our mixer guy (no respirator or air extraction) for the first two or three baths. But by bath number three his brain was getting a bit foggy and memory a bit hazy. So he often lost count and would end up pouring four tubs of resin.

    That became my problem as an installer. Each tub of resin weighed around 50 kilos and two of us could manage an 150kg install - which involved manual handling the bath in a sling.

    So now we had to mange a 200kg bath. In minus 36 degrees C, where our boots were Ice-on-ice, walking in residential construction sites up partially formed stairs with no banister or railing.

    Eventually the ski season ended and I moved onto warmer and safer environments.
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment

Welcome to the Safeguard forum!

If you are interested in workplace health & safety in New Zealand, then this is the discussion forum for you.